5,000-Year-Old Beer Recipe Had Secret Ingredient
Analysis of ancient pottery jars and funnels found at a site in China's Shaanxi province reveal barley was a key ingredient.
Barley might have been the "secret ingredient" in a 5,000-year-old beer recipe that has been reconstructed from residues on prehistoric pots from China, according to new archaeological research.
Scientists conducted tests on ancient pottery jars and funnels found at the Mijiaya archaeological site in China's Shaanxi province. The analyses revealed traces of oxalate - a beer-making byproduct that forms a scale called "beerstone" in brewing equipment - as well as residues from a variety of ancient grains and plants. These grains included broomcorn millets, an Asian wild grain known as "Job's tears," tubers from plant roots, and barley.
Barley is used to make beer because it has high levels of amylase enzymes that promote the conversion of starches into sugars during the fermenting process. It was first cultivated in western Asia and might have been used to make beer in ancient Sumer and Babylonia more than 8,000 years ago, according to historians. [See Photos of Ancient Beer Brewing in China's 'Cradle of Civilization']
The researchers said it is unclear when beer brewing began in China, but the residues from the 5,000-year-old Mijiaya artifacts represent the earliest known use of barley in the region by about 1,000 years. They also suggest that barley was used to make beer in China long before the cereal grain became a staple food there, the researchers noted.
The prehistoric brewery at the Mijiaya site consisted of ceramic pots, funnels and stoves found in pits that date back to the Neolithic (late Stone Age) Yangshao period, around 3400 to 2900 B.C., said Jiajing Wang, a Ph.D. student at Stanford University in California and lead author of a new paper on the research, published today (May 23) in the journal Proceedings of the National Academy of Sciences.
Wang told Live Science that the discovery of barley in such early artifacts was a surprise to the researchers.
Barley was the main ingredient for beer brewing in other parts of the world, such as in ancient Egypt, she said, and the barley plant might have spread into China along with the knowledge of its special use in making beer.
"It is possible that when barley was introduced from western Eurasia into the Central Plain of China, it came with the knowledge that the grain was a good ingredient for beer brewing," Wang said. "So it was not only the introduction of a new crop, but also the knowledge associated with the crop."
The ancient art of beer
The Mijiaya site was discovered in 1923 by Swedish archaeologist Johan Gunnar Andersson, Wang said. The site, located near the present-day center of the city of Xi'an, was excavated by Chinese archaeologists between 2004 and 2006, before being developed for modern residential buildings.
After the full excavation report was published in 2012, Wang's co-author on the new paper, archaeologist Li Liu of Stanford, noticed that the pottery assemblages from two of the pits could have been used to make alcohol, mainly because of the presence of funnels and stoves.
Wang said that some Chinese scholars had suggested several years ago that the Yangshao funnels might have been used to make alcohol, but there had been no direct evidence until now. [Raise Your Glass: 10 Intoxicating Beer Facts]
In the summer of 2015, the Stanford researchers traveled to Xi'an and visited the Shaanxi Institute of Archaeology, where the artifacts from the Mijiaya site are now stored.
The scientists extracted residues from the artifacts, and their analysis of the residues turned out to prove their hypothesis: that "people in China brewed beer with barley around 5,000 years ago," Wang said.
Reconstructing the recipe
The researchers found yellowish remnants in the wide-mouthed pots, funnels and amphorae that suggested the vessels were used for beer brewing, filtration and storage. The stoves in the pits were probably used to provide heat for mashing the grains, according to the archaeologists.
The beer recipe used a variety of starchy grains, including barley, as well as tubers, which would have added starch for the fermentation process and sweetness to the flavor of the beer, the researchers said.
Wang and her co-authors wrote that barley had been found in a few Bronze Age sites in the Central Plain of China, all dated to around or after 2000 B.C. However, barley did not become a staple crop in the region until the Han dynasty, from 206 B.C. to A.D. 220, the researchers said.
"Together, the lines of evidence suggest that the Yangshao people may have concocted a 5,000-year-old beer recipe that ushered the cultural practice of beer brewing into ancient China," the archaeologists wrote in the paper. "It is possible that the few rare finds of barley in the Central Plain during the Bronze Age indicate their earlier introduction as rare, exotic food."
"Our findings imply that early beer making may have motivated the initial translocation of barley from western Eurasia into the Central Plain of China before the crop became a part of agricultural subsistence in the region 3,000 years later," the researchers wrote.
It's even possible that beer-making technology aided the development of complex human societies in the region, the researchers said. "Like other alcoholic beverages, beer is one of the most widely used and versatile drugs in the world, and it has been used for negotiating different kinds of social relationships," the archaeologists wrote.
"The production and consumption of Yangshao beer may have contributed to the emergence of hierarchical societies in the Central Plain, the region known as ‘the cradle of Chinese civilization,'" they added.
Original article on Live Science.
Copyright 2016 LiveScience, a Purch company. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.
A stove fragment from the Mijiaya site that was probably used to heat the fermenting grain mash during the beer-brewing process.
Ink seems so retro now that machines can custom-print myriad 3-D objects, including snacks. Here are some of the most impressive edibles to emerge from 3-D printers so far.
is at the forefront of 3-D printed food. The lab’s Fab@Home project led by PhD candidate Jeffrey Ian Lipton uses solid freeform fabrication to print interesting snacks. Lab researchers worked with the French Culinary Institute to print this space shuttle from cheese.
Printing with chocolate is a no-brainer given its consistency but what used to be a novelty has started going mainstream. Chocolate companies are using 3-D printing tech in new ways, like this
printed for Nestlé and Android KitKat’s
Using food like ink can be much trickier than generating a mold from 3-D tech. Several years ago
and his team at
custom-built a 3-D fabricator that fused sugar together into sculptures. More recently 3D Systems released the ChefJet printer to produce confections and cake-toppers.
One day the pizza question could be, Fresh, frozen or printed? The Barcelona-based startup Natural Machines printed fresh pizzas using a 3-D machine prototype called Foodini in 2013. At the same time, NASA gave a grant to the Systems and Materials Research Corporation in Austin to develop pizza-printing capabilities for space.
The crew at Cornell University’s Creative Machines Lab did print thick cookies containing the letter C but German designer
produced fewer crumbs. He collaborated with a professor at the University of Applied Sciences Coburg to print
from red and green colored dough.
Printed meat doesn’t sound all that appetizing but that hasn’t stopped anyone from trying. The startup
is working on developing humane, bioprinted meat while
used their Foodini to create real swirled hamburgers -- as well as the buns and cheese to go on top.
These chips might look like ramen noodles but researchers at the Cornell Creative Machines Lab printed them from corn dough. The flower shape allowed for even frying, Fast Company reported. If you want pasta, Natural Machines says its Foodini printer can serve up gnocchi and ravioli.
The Dutch consultancy T
envisions using 3-D printing to address world hunger, although some might squirm at their proposals. Their food printer can generate nutrient-rich snacks from alternative ingredients like algae and even mealworms.
If telling kids to eat broccoli because it’s “little trees” doesn’t work, perhaps Natural Machines’ 3-D printed
will. To tempt picky young eaters, the Spanish startup produced vegetable snacks in the shape of butterflies and dinosaurs using their Foodini printer.